Oxylos O2 / CO2

Automated O2/CO2 gas analyser without consumables

The OXYLOS O2 / CO2 allows you to measure the rate of O2 / CO2 all types of containers and packaging, without protective atmosphere, and without having to use any consumables (no need to use needles or septums). Automated and safe, the OXYLOS can be adapted to your production constraints, providing you with sampling tools and customised positioning. The high-end analyser from the ABISS brand provides you with solutions for packaging when space above the contents is limited. Able to be synchronised to the packaging line, the OXYLOS becomes autonomous and does not require an operator in order to carry out measurements. This analyser is ideal for production.


  • No consumable
  • Fully hand safe
  • Laser positionning tool for sample
  • Can be synchronised to conveyors
  • Solutions where available space above the product is limited
  • Fully traceable via an internal spreadsheet
  • The needles are cleaned automatically
  • Remote maintenance 7 days a week, with remote connection available

Expert advices

  • The calibrated leaks make periodic verifications easy to carry out.
  • Check that there is enough space above the product in order to carry out the measurement or use our specially adapted needles and accessories.
  • We would recommend optimising the measurement speed depending on the target you wish to reach.
  • We would advise you to regularly save the data you have collected and to secure any power supplies.

News video

How to measure O2 and CO2 content of your packaging without consumables? The response with the OXYLOS analyzer. We present the complete test and the benefits. The test is carried out on a soft packaging.

Product informations

Custom placement toolsyes
Ingress protection of enclosureIP 65
Measurement deviceBench-mounted
EnclosureAcier inox
Weight28 kg
Width560 mm
Height495 mm
Depth473 mm
Power100-240VAC -50/60Hz - 63W
Feed pressure4 to 8 Bar (dry and oil free filtred to 20 µm) filtered at 20μm
Inlet pneumatic connection diameter4 x 6 mm tube connection
Memory capacity4 to 32go
DisplayColor touchscreen 7’’
Digital interfaces1 USB 2.0 and 1 Ethernet RJ45
Storage conditions0 - 70°C / 0 - 90% HR
Terms of use0 - 40°C / 10 - 90% HR
O2 Oxygen measurementTechnology : Electrochemical sensor
T90 response time : 750 ms
Accuracy : +/- 1% relative 
Lifetime : 18 months in air

Resolution : +/-0,01%
CO2 Carbon Dioxide measurementTechnology : NDIR
Accuracy : +/- 2% full scale
Resolution : 0,1%
T90 response time : 7s
SamplingPumping flow : 12l/h
Sample volumes : Mini 14 ml to reach a value <1% O2
Blocked circuit detectionyes
Pump suction controlyes
Compensation for atmospheric pressure variationsyes
Results storageyes
USB Connectionyes
TraceabilityFormat, line, operator, batch number, comment at the end of the test
Remote ConnectionRemote control possible for remote maintenance
Network connection (Ethernet socket)yes
Automatic non-septum testyes
Needles automatic cleaningyes
OptionsNew : Continuous measurement of the injection gas
The device can be integrated online and synchronised to conveyors; Interface ERPs
External router LAN-WAN-3G for remote access
Synchronised automatic triggering
  • Bar code scanner 1D USB
  • Pressure regulator compressed air
  • Metal detected stylus
  • Magnetic tools to position small packages in the chamber of test
  • Opening reduction plate for Oxylos with magnetic holders
  • Needle cleaning tool
  • Needle bevel point + soft suction cup
  • Needle solid bevel point + soft suction cup - main stream block - side drilled opening
  • Needle bevel point + soft suction cup - side drilled opening
  • Pinholes 20µm
  • Pinholes 30µm
  • Pinholes 75µm
  • Pinholes 100µm
  • Pinholes 200µm
  • Pinholes 400µm
  • Calibration certificate
  • 2 Needles with the bellows
  • Metal detected stylus
  • 1 Regulator filter for compressed air
  • 1 Mains cord
  • User manual
Back to top